USER MANUAL
PAGE 10
INSTALLATION INSTRUCTIONS
REPLACING THE MAINS SUPPLY CABLE
If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained via
the manufacturer or its service agents, in order to avoid hazard.
IMPORTANT!
The replacement of the mains supply cable must be carried out by a suitably qualified and licensed
electrician.
The mains supply cable should be replaced in accordance with the following instructions:
► Switch the appliance off at the socket.
► Open the terminal block on the underside of the cooktop.
► Unscrew the terminal screws fixing the cable.
► Replace the cable with one of the same length and in accordance with the specification given on pages 17 - 18.
► The “green-yellow” earth wire must be connected to the terminal marked . It must be about 10 mm longer than the
live and neutral wires.
► The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire must be connected to
the terminal marked with letter (L).