8
9
III. Weight Measurement
To measure weight only,
❶
Tap the footplate to turn the power on, and step on the footplate
When 0.0 is displayed on the screen.
❷
A “beepˮ will indicate when the measurement is complete.
The power turns off automatically when you step off the footplate.
* Zero-Point Adjustment
When the device is being calibrated,
a scrolling rectangle will appear on the screen.
If you want to test on the InBody H20N immediately after measuring weight, turn the
dial and input height. Then, hold the hand electrodes and stand with the correct test
posture to take the InBody Test.
