16
Analysis
channels
section
allows you to turn off the smoke
sensor and set its sensitivity.
EK-WL8-OV
All of the properties for
EK-WL8-OV
are the same as for
EK-WL8-O
,If the
sound signal is too loud, select
-12dB
in the
Output power attenuation
parameter.
Two-tone signal
before voice annunciation
may be switched off;
Stop alert after
is used to set the time limit of
alert;
Stop alert when removed from the base
is a
useful function that can be turned on during
system testing;
EK-WL8-OV
can start annunciation when it
detects smoke even without an activation command from the control panel, thus acting like a
standalone fire detector. To activate this function choose the required message in
Alert in
case of self alarm
parameter.
Light indication during alert
enables in-built LED flashes during voice annunciation;
2.5 LINKING WIRELESS DEVICES IN SOFTWARE
When this window pops up, press the
PROG
button on the device’s board and wait for its name
and serial number to appear in the devices list. Double click on it to start the process of linking.
Right click on the device, and then
select
Programming → Initialise
