Telephone 0800 987 8000
customerservices@inclarity.co.uk
Web
www.inclarity.co.uk
Inclarity Communications Ltd. Unit G16 The Perfume Factory, Wales Farm Road, London W3 6UG
Quick Start Guide
Polycom SPIP450
v1 12/01/2015
Installing Your Handset
The box for your handset will contain a number of
items:
The main handset chassis
A plastic ‘foot’ which should be attached to
the base of the chassis
A handset receiver
A curly wire to attach the receiver to the
main chassis
An RJ45 Ethernet cable to connect the
handset to your local network
If you have ordered a power supply unit (PSU) then
this will be provided separately. Note that the phone
does not need a PSU if your network supports power
over Ethernet (POE).
The phone has a second Ethernet port which can be
used to attach another device (e.g. your PC) to the
same network port in your office.
The phone also supports the use of a headset which
should be attached using a square RJ9 type
connecting cable to the appropriate socket on the
side of the chassis.
Once the handset is powered and connected to your
network it should boot up ready for use, with the
correct extension number, date and time displayed
on the screen.
In the event that the handset does not boot up
correctly then please contact our Support team.
