Now that you have some headsets in your
Group, you can apply a filter so that only
your Group is shown and controlled. Click
the filter icon at the bottom of the devices
pane, select Group as the filter type, and
pick your Group from the dropdown
menu. Then click Add Filter.
You’ll see that only the headsets in your
Group appear. If you press Play or send
a Playlist, the change will only affect
headsets in this Group.
You’ll also notice a QRKey icon at the top of the Devices pane, next to the name of your
Group filter. Clicking this will bring up a QRKey in the Preview pane. This gives you another
way to add headsets to the Group. On the headset, open the Scanner app and look at the
QRKey until the screen turns green.
NOTE:
You can only make changes to a headset’s Group when it is Connected
(switched on and connected to Wi-Fi).
25