background image

8                                           

 

                                   QUICK START GUIDE 

 

                                                   INCOTEX 500F

 

 

2.1.3. When the GSM initialization is complete on the display appears the message '

dAtE'. 

Enter the 

date in format DDMMYY.  Press 

 for confirmation.

2.1.4. The ESD displays message '

t'

. Enter the time HH:MM and press 

 for confirmation. 

2.1.5. The ESD displays '

SP       _ _ _ _ _ _ _'

  requiring the service password. The default service 

p

assword is 2104204134.

 Press 

 for confirmation. 

2.1.6. A message for '

service intervention'

 is printed. 

2.1.7. The ESD displays the date. To view the time, press 

. To correct the date/time press 

 

and repeat the procedure. To confirm the date/time press 

2.1.8. A message for successful initialization '

RAM IS RESET'

 is printed. 

2.1.9. The ESD displays '

ESd rdY'. 

2.2. Command mode

After the ESD is initialized  every time it is switched on  the displays shows '

ESd rdY'

. To enter 

command  mode  enter  the  service  password and  press  

. The  ESD enters command  mode  and 

displays '

ESd EntEr'

. To exit command mode press 

.

 
2.2.1. Data entering

Data entering in a digital field

When a digital field is selected, the item number is displayed on the left, followed by the contents of 
the field. If the display positions are not enough, only the content is displayed.
New content can be entered using the digit keys. In case of an error, press key   as many times as 
necessary – each pressing clears one digit from the right to the left. If the key 

 is pressed and held 

down, all the entered digits will be cleared.

Data entering in a character field

When a character field is selected, the item number is displayed on the left, followed by the number of 
the first character and the ASCII code of the character.
To enter the characters ASCII codes use the digit keys. If an ASCII code includes a leading zero, it 
must be entered. After entering 3 digits an automatic transition to the next character will be performed 
(the displayed character number increases by 1). 
Pressing the key  , when a character field is entered, prints the current text.
Pressing the key combination 

 when a character field is entered prints a table of the ASCII 

codes. A character code can be calculated by adding the column number to the number printed at the 
end of the row, where the character is printed.

ATTENTION!

 Pressing the key 

 

in a character field clears its contents and performs positioning 

for entering the first character in the field.

Summary of Contents for 500F


























































Reviews: