Big Buck Hunter™
Page 4
Version 01/05
© Copyright 2004-2005 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
D
EDICATED
C
ABINETS
D
EDICATED
G
AME
C
ONTENTS
(1)
Big Buck Hunter Call of the Wild
Dedicated Cabinet with LED Sign
(1)
Gun Assembly
(1)
Big Buck Hunter COTW Manual
(1)
Monitor Manual
(1)
50 ft. Telephone Cable
(1)
Telephone Line Splitter
R
ECOMMENDED
S
UPPLIES
q
Analog telephone connection.
q
Inexpensive telephone, used to test the line
connection.
T
HE
C
ABINET
Your Big Buck Hunter Call of the Wild cabinet comes with
the hard drive packed in a padded box inside the cabinet.
Install the hard drive carefully. Make sure all of the
connectors, wires, harnesses and PCB cards are seated
securely in their sockets before applying power.
Key Measurements
•
Shipping Dimensions (height x width x depth): 78 x 30
x 37 [inches] 198.12 x 76.2 x 93.98 [centimeters]
•
Shipping Weight: 415 [pounds] 188.24 [kilograms]
•
Power Supply Specs (input/output voltages, power):
ATX: input 115VAC (8A) 230VAC (4.5A) output
+3.3VDC (14A), +5VDC (25A), +12VDC (10A), -5VDC
(0.5A), -12VDC (1A), +5V/SB(1.5A) power 250W Max
•
Current drawn by cabinet: 2 AMPS Approximate
•
Fluorescent bulb specs: 17" F15 T8CW
•
Compliance - FCC Class A
Power Requirements
Big Buck Hunter Call of the Wild requires a 250-Watt ATX
Power Supply.
+3 VDC 14 amps
+5 VDC 25 amps
+12 VDC 10 amps
WARNING!!!
The output level of many “regulated” switching power
supplies actually varies with load. For this reason, the power
supply from an old game may not be an ATX power supply
required for a BIG BUCK HUNTER™ RED BOARD. This
makes the existing power supply inappropriate and
hazardous to your new game. Use only a 250-Watt ATX
Power Supply with the RED BOARD.
Rifle and Holster Clips
Unwrap the rifle and mount it on the two holster clips on
the control panel. You will want to calibrate your rifle for
best game play results. Refer to the Gun Calibration
section for proper calibration and adjustments procedures.
Hard Drive
BIG BUCK HUNTER CALL OF THE WILD uses a hard
drive to store its game data. The Hard Drive is shipped in a
padded box inside the cabinet. Install the hard drive
carefully, as it is very sensitive to shock. Make sure the
hard drive is mounted securely and the power and data
cables are secure. Refer to the Hard Drive section for
proper mounting and replacement procedures.
The hard drive is shipped with a mounting bracket already
attached. The bracket protects the electronics from
damage due to improper handling. DO NOT REMOVE the
bracket, as it may cause damage to the hard drive.
CAUTION!
Hard drives are sensitive to both physical and electrical
shock. DO NOT DROP OR KNOCK OVER the hard drive.
Avoid shocks and other electrical discharges. DO NOT
REMOVE the mounting bracket from the hard drive.
Removal may cause damage to the hard drive and will
void the warranty. Keep the supplied padded box for
shipping any returns. Failure to use the supplied shipping
box will void the warranty. DO NOT USE POWER TOOLS.
Returns
The Hard Drive is shipped in a shipping box that is
fastened to the inside bottom of the cabinet. Be sure to
keep this box, in case you need to move the game or ship
the hard drive. Ship the bracket with the hard drive. Do
not remove the bracket from the hard drive. Failure to use
the supplied box, or removal of the bracket, will VOID THE
WARRANTY on the hard drive.
Volume and Test Switches
Your cabinet comes equipped with a bank of buttons
mounted inside the coin door. The Test button activates
Operator Test mode, for software audits, game
adjustables, and system tests. Refer to the Operator Test
section of this manual for more information.
There are also two Volume control buttons mounted inside
the coin door. Press the button on the left to increase
volume, and press the button on the right to decrease
volume. You can also adjust volume in the Operator Test
mode by pressing the Test button.
LED Sign
Your Big Buck Hunter Call of the Wild cabinet has a
scrolling LED sign installed in the marquee section of the
cabinet. The LED sign is used by ITNet to advertise
contests and game features. When the game is not
registered to ITNet, the scrolling sign displays basic game
features for Big Buck Hunter, as a way to attract players.
When ITNet features are enabled, special messages
related to tournaments or contests will be sent through the
