43
SAVE BATTERY FUNCTION (AC/FAN)
The save-battery function starts when the power falls below a value of 21,5V.
In this case, the system (
AC
or
VENT
) shuts down, also deactivating the fan function and the message
E1
appears on the display and
the battery symbol lights up.
When the power returns, for at least 10 seconds, to the value of 25V, the system is automatically reactivated, starting up the
condenser fan, followed by the evaporator fan and compressor.
ERRORS SHOWN ON THE DISPL AY (AC/FAN)
DESCRIPTION
MESSAGE SYMBOL
Battery voltage
(The battery-saver device has cut in. Voltage has fallen below the value of 21.5 V)
E1
Fan over current cut-out
(The condenser or evaporator fan overloads the central control unit above the limited
allowed. Possible cause: short circuit or blockage of fan rotation.)
E2
Compressor locked
(The rotor is locked or the pressure inside the cooling circuit is too high.)
E3
Minimum compressor rotation speed
(If the cooling circuit is overloaded, the compressor cannot maintain the minimum
rotation speed.)
E4
High temperature on the central control unit
(If the cooling circuit is overloaded or the ambient temperature is high, the central
control unit signals this situation.)
E5
Communication error
(There is no communication between the display and the central control unit.)
E6
Temperature probe
(If the probe short-circuits or is not connected, the system stops.)
E7
Tilt
The system shut-down device installed to operate in the event of tilting has cut in.
E8
TEMPERATURE UNIT
When the system is switched off, it is possible to change the temperature unit, choosing between °C (Celsius) or °F (Fahrenheit).
Press
VENT +
,
VENT –
,
TEMP +
and
TEMP –
, buttons simultaneously to show the preset unit (°C) on the display, and the
temperature symbol will light up (see fig.6).
Quickly press
VENT +
or
VENT –
to select the unit required.
REMOTE CONTROL
The remote control regulates both the conditioning function and the fan function.
Using the remote control it is possible to:
- Switch the system on and off
- Regulate the temperature
- Regulate the fan speed
- Engage the
TURBO
function
- Modify the
TIMER
function
ONLY FOR SALES WITHIN THE EUROPEAN COMMUNITY (EU)
This appliance is marked according to the European Directive 2012/19 / EU (WEEE). The symbol on the product indi-
cates that this product should not be treated as household waste.
Ensure that this product is not entered as part of the flows of municipal waste but treated as professional WEEE.
E
N
GL
ISH
