PART #22018-DH - High-Resolution Positioner
Page 16
COMMAND SIGNAL INPUT
Common Mode Voltage (both inputs): -9 to +30 VDC
Input Impedance
10.25K ohms (1-5 VDC, 0-5 VDC, 0-10 VDC, 2-10 VDC Input)
250 ohms ±1% (4-20 mA Input)
Loss of Command threshold
< 0.75V (1-5 VDC input)
< 1.5V (2-10 VDC input)
< 3mA (4-20mA input)
Command Out of Range threshold
> 5.25V (0-5 VDC, 1-5 VDC input)
> 10.5V (0-10 VDC, 2-10 VDC input)
> 21mA (4-20mA input)A
FEEDBACK SIGNAL INPUT
Input Voltage: 0 to 2.5 VDC
External Feedback Potentiometer: 1K ohm
COMMAND POTENTIOMETER POWER OUTPUT (J2-6)
+5V OUT: 5mA maximum
NOTE: Do not connect this output to other power supplies..
DC MOTOR OUTPUTS
Maximum Running Current: 10 A
Motor Current Trip: 0 to 12 A (adjustable)
Motor Current Measurement Resolution: 85mA typical
ENVIRONMENTAL
Operating Temperature Range: 0 °C to 60 °C
Storage Temperature Range: -40 °C to 85 °C
Relative Humidity Range: 0 to 90 % (noncondensing)
.
Summary of Contents for 22018-DH
