15
15
N E X U S | E Q U I P M E N T O P E R AT I O N S G U I D E - V 1 . 5
INSTALLING THE NEXUS
|
INSTALLATION
Attaching Nexus i2 PRS to the
Inspire 2 aircraft:
1)
Attach Nexus i2 PRS to the aircraft’s right arm. Make sure the
Nexus i2 PRS bracket is lined up with the alignment sticker on the
arm.
a)
The red end cap on the Nexus i2 PRS should be facing the back
of the aircraft. Refer to safety precautions on page two (2) of this
document.
2)
Plug in the USB-C cable from the ATS housing into the Nexus i2
PRS unit. Ensure that the right-angle USB power cable is securely
plugged into the aircraft’s USB port on the right side of the aircraft.
3)
Spin the front right propeller to ensure there is no interference
with the cable.
1
2
WATCH THE INSTALL VIDEO AT:
Summary of Contents for Nexus i2 PRS
Page 16: ...16 16 NEXUS EQUIPMENT OPERATIONS GUIDE V1 5...
Page 30: ...I N D E M N I S C O M...
