Indesit K6G52.U, Operating Instructions Manual

GB

9

*

 Only available in certain models.

1. press the TIMER button 

. The display shows:

N

.

2. Press the + and -

buttons to set the desired time.

3. When the buttons are released the timer begins
counting down and the current time appears on the
display.

R

4. After the time has elapsed a buzzer will sound,
and this can be switched off by pressing any button
(except the + and - buttons). The symbol 

will

switch off.

!!!!!

     The timer does not switch the oven on or off.

Adjusting the volume of the buzzer

After selecting and confirming the clock settings,
use the - button to adjust the volume of the alarm
buzzer.

Setting the cooking time with a delayed start

First decide which cooking mode you wish to use
and set a suitable temperature using the SELECTOR
and THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button 

.

2. Within 4 seconds of having pressed this button,
set the desired amount of time by pressing the + and
- buttons. If, for example, you wish to set a cooking
time of 30 minutes, the display will show:

N

3. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the symbol 

m

m

m

m

m

and the letter A (AUTO).

Next the desired cooking end time must be set:

4. Press the END COOKING TIME button 

.

5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the + and -
buttons. If, for example, you want cooking to end at
13.00, the display shows:

O

6. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the letter A (AUTO).

P

At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30
minutes, at 13.00.

Setting the cooking time with an immediate start

place the dripping pan in position 1 to collect
cooking residues (fat and/or grease).

MULTI-COOKING

• Use position 2 and 4, placing the food that

requires more heat on 2.

• Place the dripping pan on the bottom and the rack

on top.

BARBECUE

• Insert the rack in position 3 or 4. Place the food in

the centre of the rack.

• We recommend that you set the maximum power

level. The top heating element is regulated by a
thermostat and may not always be on.

PIZZA MODE

• Use a light aluminium pizza pan. Place it on the

rack provided.

For a crispy crust, do not use the dripping pan

(prevents crust from forming by extending cooking
time).

• If the pizza has a lot of toppings, we recommend

adding the mozzarella cheese on top of the pizza
halfway through the cooking process.

Planning cooking with the electronic

programmer*

Setting the clock

After the appliance has been connected to the power
supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button 

 and the

COOKING END TIME 

 simultaneously.

2. Within 4 seconds of having pressed these
buttons, set the exact time by pressing the + and -
buttons. The + button advances the hours and the

-

button decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the
time has elapsed a buzzer sounds.
To set the timer proceed as follows: