Indesit KN6G527S/RU S Operating Instructions Manual Download

Page: 24 / 32

Using the hob

Lighting the burners

For each BURNER knob there is a complete ring
showing the strength of the flame for the relevant
burner.
To light one of the burners on the hob:
1. Bring a flame or gas lighter close to the burner.
2. Press the BURNER knob and turn it in an
anticlockwise direction so that it is pointing to the
maximum flame setting

3. Adjust the intensity of the flame to the desired
level by turning the BURNER knob in an
anticlockwise direction. This may be the minimum
setting

, the maximum setting

or any position

in between the two.

If the appliance is fitted with
an electronic lighting
device* (

X), press the

ignition button, marked with
the symbol

, then hold

the BURNER knob down
and turn it in an

anticlockwise direction, towards the maximum flame
setting, until the burner is lit.
Several models are equipped with an ignition device
which is built into the knob; in this case the
electronic ignition device* is present (

C) but the

ignition button is not. Simply press the BURNER
knob and turn it in an anticlockwise direction so that
it is pointing to the maximum flame setting, until the
burner is lit. The burner may be extinguished when
the knob is released. If this occurs, repeat the
operation, holding the knob down for a longer period
of time.

If the flame is accidentally extinguished, switch off

the burner and wait for at least 1 minute before
attempting to relight it.
If the appliance is equipped with a flame failure
safety device*(X), press and hold the BURNER knob
for approximately 2-3 seconds to keep the flame
alight and to activate the device.
To switch the burner off, turn the knob until it
reaches the stop position •.

Start-up and use

Practical advice on using the burners

For the burners to work in the most efficient way
possible and to save on the amount of gas
consumed, it is recommended that only pans that
have a lid and a flat base are used. They should also
be suited to the size of the burner.

To identify the type of burner, please refer to the
diagrams contained in the “Burner and nozzle
specifications”.

Using the oven

The first time you use your appliance, heat the

empty oven with its door closed at its maximum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit a
slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.

Before operating the product, remove all plastic

film from the sides of the appliance.

! !

! Only use the bottom shelf of the oven when using
the rotisserie to cook (where present). For all other
types of cooking, never use the bottom shelf and
never place anything on the bottom of the oven
when it is in operation because this could damage
the enamel. Always place your cookware (dishes,
aluminium foil, etc. etc.) on the grate provided with
the appliance inserted especially along the oven
guides.

The Oven Control Knobs

The “5 Programms” oven combines all the
advantages of traditional “static” ovens with those of
modern “ventilated” ones.
The”5 Programms” oven is extremely versatile and
offers 5 different but sure and easy ways of cooking.
Use the knobs to select the different cooking
functions available on the “5 Programms” oven:
selector knob ;
thermostat knob .

Only available in certain models.

Fast

(R)

Semi

Fast

(S)

Auxiliary

(A)

WARNING! The glass lid can

WARNING! The glass lid can
break in if it is heated up. Turn

break in if it is heated up. Turn

break in if it is heated up. Turn
off all the burners and the