Indesit TAAN 6 FNFxx, Operating Instructions Manual

GB

15

Installation

!

 Before placing your new appliance into operation please read

these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.

!

 Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate
correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation
kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left
side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated on

the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised
technician to replace it (

see Assistance

). Do not use extension

cords or multiple sockets.

!

 Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

!

 The cable must not be bent or compressed.

!

 The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

! The manufacturer declines any liability should these safety
measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation
instructions (

see Installation

).

!

 Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal light

illuminates ( the FREEZER OPERATION knob must not be on the
position  ) .

2. Turn the FREEZER OPERATION knob and REFRIGERATOR

OPERATION knob to an average value. After a few hours you
will be able to put food in the refrigerator.

Using the refrigerator to its full potential

fridge

The temperature inside the refrigerator compartment automatically
adjusts itself according to the position of the thermostat knob.

min 

= warmest

max 

= coldest

is the optimal temperature for energy saving levels.
is the holiday function (

see Maintenance and care

).

It is recognisable by aeration cells located on the back walls of the
compartments.
The No Frost system circulates cold air continuously to collect
humidity and prevent ice and frost formation. The system maintains
an optimal humidity level in the compartment, preserving the
original quality of the food, preventing the food from sticking
together and making defrosting a thing of the past.

• Do not block the aeration cells by placing food or containers in

direct contact with the refrigerating back panel.

• Close bottles and wrap food tightly.
• Place only cold or lukewarm foods in the compartment, not hot

foods (

see Precautions and tips

).

• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers. They will increase

humidity in the refrigerator and cause condensation to form.

SHELVES:

 with or without grill.

Due to the special guides the shelves are removable and the height
is adjustable (

see diagram

), allowing easy storage of large

containers and food. Height can be adjusted without complete
removal of the shelf.