31
Index V5 printer manual
© 2020 Index Braille
Protected service
(passw ord
protected)
Delay tim e for
solenoids
8 pages with alternative delay time for
solenoids are printed. 0 is the default value.
Select best option.
Gap betw een
print heads
BrailleBox only
Command center
Start command center.
Internal factory functions
Production test
Wizard for production test
Print production
test
Print a defined number of pages suitable for testing
a printer after service
Select embosser
model
This function select w hich embosser model the
high level CPU are installed. Same board for BB/FF
and Basic/Everest/Juliet and Romeo.
4.2
Wizards
Wizards are used to guide users through setup, calibration, adjustment etc. All
wizards follow the same user interface structure and the speech feedback will
provide further instructions.
·
Start a wizard in the MENU structure
·
Follow the wizard by pressing the
right arrow to next step and left arrow to previous
step.
·
When edit a value, press:
OK to edit, Arrow up/down to select and OK again to save.
·
Wizards are completed when pressing OK in the far right step
"Wizard completed. Press OK to save".
4.2.1
Standard layout wizard
STANDARD
WIZARD
GUIDELINES
ADDITIONAL INFORMATION
Paper size
Select paper size available in the
region used in the printer
Asian, European, US, Russian,
or Japanese
If paper from other regions are
needed, select advanced layout and
select this region.
User defined paper size may
be defined in
Basic-D and
Everest-D only.
Print type
Select from list.
Basic-D
: Double/single, Z-
folded double/single, and Z-
folded sideways single/double-
sided.
