Manual Index Everest-D
Index Braille Printer Company
Page 35
Version 4.32
7.2
Problem solving.
If you encounter any problem when using the sheet feeder, reading this section should help you to
solve it. There may be more than one cause and remedy to a problem.
PROBLEM: THE FEEDER DOES NOT OPERATE (NO PAPER FEED).
Cause:
Paper feeder is not in the operating position.
Remedy:
Set paper bin to correct operating position.
Cause:
The sheet feeder is out of paper.
Remedy:
Reload the paper bin.
Cause:
There is a paper jam.
Remedy:
Remove the jammed paper and restack the paper.
PROBLEM: MORE THAN ONE SHEET OF PAPER FEEDS AT A TIME.
Cause:
The paper separation lever of the bin is in the card position.
Remedy:
Pull the buttons upwards to the sheet position.
Cause:
The paper is not sufficiently fanned.
Remedy:
Fan the paper and reload paper stack.
Cause:
The paper is damaged.
Remedy:
Replace the paper.
Cause:
Paper is loaded incorrect.
Remedy:
Turn around the paper stack (see picture on this side).
Cause:
The sheet feeder supports is not in use.
Remedy:
Place them in the right positon on the sheet feeder.
PROBLEM: PAPER GOES ASKEW.
Cause:
The paper is damaged.
Remedy:
Remove paper from the bin and replace it with new paper.
Cause:
The paper bin is misaligned.
Remedy:
Re-adjust the paper bin.
Cause:
Feeder pick-up rollers are not gripping the paper properly.
Remedy:
Check paper surface for defects. Clean the pick-up rollers.