Manual Index Everest-D
Index Braille Printer Company
Page 45
Version 4.32
Position 22 - Volume.
0 = volume 1
1 = volume 2
2 = volume 3
3 = volume 4
4 = volume 5
Position 23 - Impact level.
0 = Impact level 1
1 = Impact level 2
2 = Impact level 3
3 = Impact level 4
4 = Impact level 5
Position 24 - Delay.
0 = Delay 1
1 = Delay 2
2 = Delay 3
3 = Delay 4
4 = Delay 5
Position 25 - Printing speed.
0 = 60 cps
1 = 70 cps
2 = 80 cps
3 = 90 cps
4 = 100cps
Position 26 - Grafic dot distance.
0 = Grafic mode 2.0 mm
1 = Grafic mode 2.5 mm
Position 27 - Text dot distance.
0 = Text mode normal, 2.5 mm.
1 = Text mode Japan, 2.2 mm.
Position 28 - Setup.
0 = Setup closed
1 = Setup open
Position 29 - Line type
0 = Interpoint
1 = Interline
Position 30 - Lines per page
0 = - 0 line
1 = - 1 lines and so on until...
9 = - 9 lines
Position 31-39.
Position 30 - 39 position is all set 0
in main software.
0 = IDLE.
9.6
Page numbering selection by ESC sequences
While printing several documents, that should be connected to each other as one document, it is
possible to select continius page numbering.
To choose continuing number from the of the previous document, send the following ESC-
sequence in the beginning of the file, like a driver:
ESC^Q,0,ESC
To choose a certain page number from the first page of the next document, send the following
ESC-sequence in the beginning of the file, like a driver:
ESC^Q,xxx,ESC
9.7
Multiple copies selection by ESC sequences
Choose number of copies by sending the following ESC sequence in the beginning of the file, like
a driver:
ESC^R, xxx,ESC^R
Note!
If the printer is pre-setted in "multiple copy mode", that will override the software com-
mand!