background image

Index Braille

Page 19

Manual Index Everest

January 2000

Verson 8.20/9.20

6.3.4.1

Word wrap

Select between split words or wrap it to the next line.

6.3.4.2

Auto line-feed

Select an automatic line-feed together with a carriage return according to your computer software.

6.3.4.3

Form Feed

Select ON to get an empty page between each copy of a document.

6.3.4.4

Volume

Select the volume of the speech feedback.

6.3.4.5

Impact level

Select the impact level on the hammers according to different paper qualities.

6.3.4.6

Delay time

Select the delay time for the printer to wait for more information after a file.

Note! Using a computer with a slow disc-drive requires a longer delay time in the printer.

6.3.4.7

Print quality

Select normal or high print quality.

High quality prints every line twice. This improves the Braille quality when printing very heavy
paper or plastic sheets.

6.3.4.8

Graphic dot distance

Select between 1.6, 2.0 or 2.5 mm resolution in graphic mode.

6.3.4.9

Text dot distance

Selects resolution in text mode.
Select between 2.2 mm Japanese standard, 2.5 mm Normal or 3.2 mm Jumbo Braille.

Note! 2.2 mm sets automatically Line type Japanese. Maximum number of characters per line in
Japanese mode is 48.

6.3.4.10

Set up

Select access to setup. NOT OPEN gives access only by the command “power on + Setup key”.
OPEN gives access by pressing the Setup key when printer is on stand by.
Changing of access to Set up (Open/Not open) will effect all three setups, A/B/C.

Summary of Contents for EVEREST Series




































Reviews: