Indivision AGA MK2 4000D / CD32 installation
Dear customer,
thank you for purchasing a product from Individual Computers. We're sure that your new
flickerfixer will satisfy all your needs. However, we would like to emphasize that installing
the product in an Amiga 4000D or CD32 is not easy, and it requires some skills. Please
make sure that you have enough light at your desk!
Installing the flickerfixer should only be done by experienced persons. If you have never
opened your Amiga 4000D or CD32, you should get help from a technician.
Installation in an A4000 desktop:
Open the computer and remove all Zorro cards to get access to the mainboard. The board
of your A4000D is now lying in front of you like this:
The picture above marks the Lisa chip, which is responsible for the video output of the
Amiga. The socket of Indivision AGA MK2 is placed over top of this chip. The connector for
the cable of Indivision AGA MK2 must face to the mouseports.
The computer must be placed on a stable, level surface. First, place the socket over the
Lisa chip, but do not push yet! Double-check that all pins line up properly. If the socket
should be tilted in any way, it might be destroyed by the pressure that must be applied.
The socket is in place if the board is level on the Lisa chip, but cannot be rotated any
more.
Your final step is to push the socket on the Lisa chip. You might need to push very hard,
but
do not use any tools for this step!
It is possible to apply the required pressure with
your thumbs.
