background image

8

• DO NOT operate this bike in damp or wet locations. 
• Use caution when getting on or off the bike.   
• Check the exercise bike for worn or loose components before each use. DO NOT use 

until worn or damaged parts are replaced. 

• Maintain regularly. Refer to 

Preventive Maintenance chapter. 

• DO NOT use the bike if: (1) the bike is not working adequately or (3) the bike has 

been dropped or damaged. 

• DO NOT use the exercise bike outdoors. 
• Read the instruction manual completely before using the bike. 
• Ensure all users wear appropriate footwear on JLL

®

 equipment.

• Set up and operate the bike on a level surface. DO NOT operate in small 

restricted areas or on plush carpet. 

• As far as possible provide the following clearances: 0.5 m at each side and 2 m at 

the back. Be sure your exercise bike is clear of walls, equipment and other hard 
surfaces. 

• 

Modifications can be made to the bike if necessary however, they must not damage 

the original bike itself. Any queries can be answered by our customer service team 
on 0121 328 7507 - 0800 6123 988.

• All the data displayed by the monitor is for reference purposes only.

FACILITY SAFETY PRECAUTIONS

Warning stickers indicate a potentially hazardous situation which, if not avoided, could 
result in death or serious injury. Carefully read the following caution and warning labels 
before using the unit.

WARNING STICKERS

It is strictly forbidden to touch any moving parts of the bike.

Keep small children and pets a safe distance from bike when in use. 

WARNING

WARNING

Summary of Contents for IC 250 PRO

























Reviews: