25
EN
G
WARNING!
Please carefully observe the following instructions. The maintenance and care procedures
must be performed in the regularity set out, to ensure maximum operating safety and lifespan.
Irregularly observed maintenance and care procedures will lead to increased wear to the
product and will void the warranty. If you have any further questions on this topic, please
contact our technical support.
Please only use an acid- and solvent-free maintenance and care agent to prevent damage to
components of the bike.
DAILY MAINTENANCE:
1.
Make sure that the bike is horizontal, leveled and does not rock
(if necessary adjust as described on p.19).
2.
Cleaning: The bike must be regularly cleaned after each use for reasons of hygiene. Ensure
that there are sufficient soft cloths or paper towels, maintenance and disinfection agent
available. First disinfect the saddle and handlebars with a suitable agent and then wipe all bodily
residues off the entire bike.
WEEKLY MAINTENANCE:
1.
Cleaning: Depending on how often the bike is used, it must be extensively cleaned once
a week. To do this, spray a maintenance spray onto a soft cloth and clean all plastic parts,
the entire flywheel, exposed frame components including stabilizers and the plastic casing.
Never spray maintenance spray or anything else directly onto the flywheel or pedal to ease
cleaning, as this could cause the drive belt to slip during use, or damage internal components.
PREVENTIVE
MAINTENANCE
Summary of Contents for LifeFitness IC-LFIC8C1-01
Page 35: ...35 ENG...
