01.05.2014 (release date and version)
_________________________________________________________________________________
FB TS AS7 01 ICG® Standard Operating Procedure | released by ICG® Service Department 8
3) Checking of saddle position
a) Place the bike as shown on the picture.
b) Make sure that the seat is fixed in a level horizontal and vertical position.
Seat clamp must be tightened securely from both sides to minimize loosening during use.
Firmly tighten with the 13mm open end spanner or equivalent.
Maximum torque: 25Nm.
c)
ATTENTION!:
Position the rails of the saddle into the saddle clamp until you can see the
position 25 as shown on the picture
a) b)
c)
