background image

General Information

 

Please read these instructions thoroughly before attempting to connect and operate the S2.

Check Speaker and Parts

Unpack and carefully check each loudspeaker.  If you suspect damage from transit, report the 
problem immediately to your dealer and/or delivery service.  If possible, save the shipping 
cartons for future use.  

General Care of Your Loudspeaker

Whenever changing speaker wires, interconnect wires, or power cords, always turn off all 
equipment.  To prevent fire or shock hazard, do not expose the amplifier to rain or excessive 
moisture.  To avoid electric shock, do not open the amplifier.  There are no user serviceable 
parts inside.

Your speakers and amplifier come in a high quality finish that is both attractive and durable.  
To clean, use a soft, damp cloth.  If your drivers become dusty, dust them with a paintbrush 
or a brush vacuum attachment.  Do not use a strong or abrasive cleaner.

The grille is covered in acoustic cloth.  To keep your grille clear of debris, we recommend 
you use a lint roller (like you would use on clothes).

Bass and Loudness Contour Controls

Do not use bass or loudness contour controls.  Induction Dynamics’ subwoofers produce 
very low frequencies without these controls.  Use of these controls will make the bass sound 
“boomy”, obscure higher frequencies, and possibly cause damage.

S2 Location

S2 speakers are normally freestanding, but may also be used as bookshelf speakers.  The 
height of the S2s should be determined by locating the tweeter at ear level.  The tweeter 
reproduces high-frequency audio, which our ears perceive as most directional, so we are 
most attuned to their level and placement.  Consider whether people will be sitting or 
standing in the listening area when placing the S2s.

A pair of S2s should be placed a few feet from the front wall of the listening area, six feet 
or more apart.  Experiment with the distance between the two speakers to achieve an 
evenly spread sound stage.  Speakers should be at the same height (with the tweeter at 
ear level).  To optimize bass response, vary the distance of your S2 speakers from the front 
wall.

3

Summary of Contents for S1.8















Reviews: