Chapter
2
:
Hardware Setup
Installing a CompactFlash Card
IMM-L30D provides one CompactFlash slot Follow the
procedures bellow for installing a CompactFlash card
Unscrew the thumbscrew on the CF slot to take out
the front cover
Align CompactFlash and the card slot with the arrow
on the CompactFlash pointing toward the connector
Insert the CompactFlash into the connector
Close the cover and fasten it with thumbscrew to the
slot
Note:
The device has an error proof design so that
it can’t be inserted if it is in the wrong orientation
You should insert the CF card with its cutout facing
up and arrow on the CompactFlash pointing
toward the connector
1
2
3
Preparing the Hardware Installation
To access some components and perform certain service
procedures, you must perform the following procedures
first
WARNING:
To reduce the risk of personal injury,
electric shock, or damage to the equipment,
remove the power cord to remove power from the
server The front panel Power On/Standby button
does not completely shut off system power
Portions of the power supply and some internal
circuitry remain active until AC power is removed
Unpower the IMM-L30D and remove the power cord
1
The top cover has a horse shoe shape Unscrew the
2
3 threaded screws at the top and the bottom of the
opposite side and 2 from each side of the IMM-L30D
system
Slide the cover backwards to open the cover
3
upwards
Installing the System Memory
The motherboard supports DDR2 memory that features
data transfer rates of 667 MHz to meet the higher
bandwidth requirements of the latest operating system
and Internet applications It comes with one Double Data
Rate(DDR2) Small Outline Dual Inline Memory Module
(SO-DIMM) socket
Align the memory module’s cutout with the SO-DIMM
1
socket’s notch
Install the SO-DIMM
2
4
Notch
Cutout
Note:
SO-DIMMs installed should meet the required
1
speed which is 667 MHz Do not install SO-DIMM
supporting different speeds
The motherboard supports a maximum memory
2
capacity of 2GB
1
2
3
4
Connecting Power
Connect the IMM-L30D to a 12~36 VDC power source The
power source comes from an AC/DC Adapter through a
Phoenix contact
-
+
IM
M
-
L30D
User Manual
5
