page 4
LAMP AIMING
LIFE SAFETY SOLUTIONS
TEL: 800-705-SERV (7378)
techsupport-emergency@acuitybrands.com
Federal Communications Commission (FCC)
Requirements:
This device complies with FCC Title 47, Part 15, Subpart B.
this device does not cause harmful interference.
LAMP AIMING
1
With lamp heads aimed, begin by
tightening the nut until the gasket is
fully compressed.
(Torque spec: 20 in-lbs)
2
With unit open, loosen the nut
and screw and aim the lamp
head to the desired position.
3
Nut
Washer
Screw
Gasket
With nut secure, tighten the screw to
finish aiming procedure.
(Torque spec: 12 in-lbs)
Part # 912-00033-001
Rev.G, 12/2020
© 2020, Acuity Brands Lighting, inc.
All Rights Reserved.