background image

 2

Safety Information

Table of Contents

Safety Information ....................................2

Work Area Safety ...................................2
Personal Safety  .....................................3
Moving the Compressor .........................3
Air Compressor and 
Pneumatic Tool Safety ...........................4
Electrical Safety .....................................5

Warranty ...................................................7
Pre-Operation ...........................................8

Specifications ........................................8
Duty Cycle ..............................................8
Package Contents ..................................8 

System Components ..............................9
Placement of the Air Compressor ........10
Attaching the Hose  ..............................11
Tool Usage............................................12

Operation.................................................13
Maintenance ...........................................17

General Maintenance ...........................17
Lubrication ...........................................17
Cleaning the Air Filter  .........................17

Care and Cleaning ..................................17
Troubleshooting ......................................18
Service Parts  ..........................................20

This manual contains information that is important for 
you to know and understand. This information relates 
to protecting your safety and preventing equipment 
problems. To help you recognize this information, we 
use the symbols below. Please read the manual and pay 
attention to these symbols.

WORK AREA SAFETY

 

Keep your work area clean and well lit. Ensure 
floors are not slippery from wax or dust. 

 

Operate the air compressor in an open area at least 
18 in. (0.5 m) away from any wall or object that 
could restrict the flow of fresh air to ventilation  
openings. 

WARNING

:

 Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 
liquids, gases, or dust. Power tools create sparks which 
may ignite the dust or fumes. Keep bystanders, children, 
and visitors away while operating tools. Distractions can 
cause you to lose control.

DANGER

: Indicates an imminently hazardous situation 

which, if not avoided, 

will result in death or serious injury.

 

WARNING

:

 Indicates a potentially  hazardous situation 

which, if not avoided, 

could result in death or serious 

injury.

CAUTION

:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or moderate 

injury.

 NOTICE

:

 Indicates a practice not related to personal injury which, if 

not avoided, 

may

 result in 

property damage

.

WARNING

:

 This compressor is not equipped for, and 

should not be used to supply breathing air. Additional 
equipment would be necessary to properly filter and 
purify the air to meet minimal specifications for Grade D 
breathing as described in Compressed Gas Association 
Commodity, Specification G 7.1 - 1966, OSHA 29 CF9 
1910.134. Compressed Gas Association, 4221 Walney 
Road, Fifth Floor, Chantilly, VA 20151-2923, (703) 788-2700, 
www.cganet.com. Any such additional equipment has 
not been examined and no implication of proper use for 
breathing air is intended or implied.

CAUTION

:

 Always disconnect the air supply and power 

supply before making adjustments, servicing a tool, or 
when a tool is not in use.

Summary of Contents for C041I

























Reviews: