background image

 16

Draining the tank

WARNING:

 Risk of unsafe operation. Air tanks contain 

high pressure air. Keep face and other body parts away 
from the drain outlet. Use eye protection [ANSI Z87.1 (CAN/
CSA Z94.3)] when draining, as debris can be kicked up 
into the face.

WARNING:

 Risk from noise. Use ear protection (ANSI 

S12.6 (S3.19), as air flow noise is loud when draining.

WARNING:

 Risk of bursting. Water will condense in the 

air tank. If not drained, water will corrode and weaken the 
air tank causing a risk of air tank rupture.

NOTE:

 All compressed air systems generate condensate 

that accumulates in any drain point (e.g., tanks, filter, 
after-coolers, dryers). This condensate contains lubricating 
oil and/or substances which may be regulated and must 
be disposed of in accordance with local, state, and federal 
laws and regulations.

NOTE:

 If the drain valve is plugged, release all air 

pressure. The valve can then be removed, cleaned, then 
reinstalled.

NOTE:

 Risk of property damage. Drained water from the 

air tank may contain oil and rust which can cause stains.

 

Set the AUTO/OFF switch (1) to the off position.

 

Slowly bleed the air from the compressor 
tank by pulling the safety valve to allow the 
pressure to escape from the tank until the 
pressure is approximately 20 psi.

 

Drain water from the tank by opening the drain 
valve (2) on the bottom of the tank. 

 

After the water has been drained, close the 
drain valve. The air compressor can now be 
stored. 

1

2

Operation (continued)

Summary of Contents for C042I


























Reviews: