31/142
AB Industrietechnik srl – Via Julius Durst, 70 – 39042 BRESSANONE (BZ) Italy – Tel: +39 0472/830626 – info@industrietechnik.it – www.industrietechnik.it
8.
7,0(56/276RSHUDWLRQDQGFRQ¿JXUDWLR[[&6+
Depending on parameter
I78
, the time slots can be assigned to normal/economy control (
I78
=0) or to switch on/off the appli-
ance (
I78
=1).
A maximum of 4 time slots can be used for each zone per day.
• With
I78
=0 control is normal within an ON period (control with base setpoints). Outside ON period, the controller works in
econom
y mode (see
³6HDVRQRSHUDWLQJVHWSRLQWHFRQRP\KROLGD\PRGH´SDJH
53
).
Time
Time
Time
Time
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Time
OFF
ON
ECO
NO
ECO
NO
ECO
NO
ECO
ECO
ECO
Timer
slot 1
Timer
slot 2
Timer
slot 3
Timer
slot 4
Operating
mode
ECO = economy mode, NO ECO = normal mode (control with base setpoint).
• With
I78
=1 the appliance is switched on within an ON period. Outside ON period, the controller is switched off.
Time
Time
Time
Time
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Time
OFF
ON
Timer
period 1
Timer
period 2
Timer
period 3
Timer
period 4
Operating
mode
OFF
ON
OFF
OFF
ON
ON
OFF
= appliance switched off,
ON
= appliance switched on.
