4 - PayCon Touch - First Time Log On
Setup
Configure PayCon Touch terminals
When the PayCon Touch starts when it hasn't been configured, you
will be able to set these connection settings. To do this press the
touchscreen at the lower right corner.
The setup menu will be available when; the settings have not yet
been set, when the network cable is not connected, or when the
Business Server is offline.
In the setup menu, carry out the following:
Fill out the Location ID and the Server address.
Summary of Contents for PayCon Touch - First Time Log On
