C-Com Satellite Systems Inc
Page 53 of 77
iNetVu™ 5000 Controller User Manual
Revision 1.0.2
GPS Parameters
Fig. 39:
Maintenance Menu – GPS Parameters
Override
Enables the GPS coordinates to be manually overridden. This should only to be enabled
in the event that the GPS Antenna is malfunctioning and the user has a reliable,
alternate source for coordinates.
Note:
If you have overridden the GPS coordinates, they will have to be updated if the
Mobile Platform has moved to a new location since the overridden values will no longer
be accurate.
RF Parameters
Enables the RF Threshold to be manually overridden.
Fig. 40:
Maintenance Menu - RF Parameters
Override / Threshold
Used by the iNetVu™ Mobile Software to begin a signal optimization process for peaking
on a Satellite signal after initially locating it. Enabling this option and setting the RF value
too low will result in an inability to acquire a reliable signal.
Compass Parameters
The Compass is pre-calibrated by a professional installer at the time of system
installation.
A number of factors can contribute to the iNetVu™ compass to produce an incorrect
reading such as being parked in close proximity to a large metallic object. Should the
compass heading be inaccurate by more than 20 degrees, you may need to re-calibrate
it.
Fig. 41:
Maintenance Menu - Compass Parameters
