C-COM Satellite Systems Inc.
Page 116 of 164
Demodulator/Carrier (RADYNE MDX Modem Only)
--- Demodulator Number (1--4)
--- Remote Number on selected demodulator (1--8)
Password/CD-KEY
Some modems require a password to access their interface. For modems that do not
require a password, this field is irrelevant to the communication status between the
modem and the controller and will not affect the communication establishment. For
modems that have a blank password, this field should be left blank. The CD-KEY is used
for the iPSTAR service ONLY.
Service Type
User has the option to choose between 7 service types, YAHSAT, Avanti (4 tables) and
North America (2 tables). Once the service type is chosen, the user must click on the
Update
Beam Table
button to apply the correct Beam Table for the selected Service
type
.
This must be done before the correct Beam ID is entered
otherwise it will not see it in the table.
Update Beam Table
This button will switch to the selected Service Type table and use the saved Beam data.
DVB Settings will be automatically be filled with the correct values associated with the
selected Beam ID. The Update Beam Table button is only required to be applied once
as long as you continue to use same Service Type. This option is only available with the
HN_KA modem service and must be applied before correct Beam ID values appear in
drop-down.
Beam ID
This option is only available with the HN_KA modem service. Beam ID will be provided
by the NOC or service provider once user provides location.
Auto-select Beam Color
This option is only available with the Tooway modem service. Select the Auto-select
Beam Color to have the system automatically lock on the Beam Color by referring to the
Tooway configuration file (iNetVu7000_ConfigForTooway.txt) and GPS location.
Auto RF Mode
Available with Tooway modem service. Selecting this option will automatically insert the
search settings for the Tooway (consumer) modem.
Update Look-Up Table
Updates controller with new table information. This feature also allows Auto Beam
searching using GPS location coordinates to lock on Beam color. The user must update
