C-COM Satellite Systems Inc.
Page 41 of 164
7.6.1.8. S2
This menu displays the Reference Satellite Status, Longitude, Target Antenna
Coordinates, DVB Transponder (Frequency, Symbol Rate, and Code Rate) and LNB
Power. The reference satellite is another search option that could be utilized by the user.
If this option is disabled, you may disregard all this information.
Fig. 25:
“S2” (Reference Satellite) Display
1 – Reference Satellite Longitude, Hemisphere, and Status
Status “D”:
implies the reference satellite option is disabled
Status “E”:
implies the target satellite option is enabled
2 – Reference Satellite Antenna Elevation, Azimuth, and Polarization coordinates
respectively.
3 - Transponder Number (for reference satellite)
There are six (6) transponders for each satellite stored into the controller
memory) 0 – 2 are horizontal receive, and 3-5 are vertical receive. The user may
overwrite the transponder data.
4 – Reference Satellite DVB Transponder Frequency (MHz)
5 – Reference Satellite Transponder Symbol Rate (Ksps)
6 – Reference Satellite Transponder Code Rate. (DVBS1 requirement)
DB-1 = 1/2
DB-2 = 2/3
DB-3 = 3/4
DB-5 = 5/6
DB-7 = 7/8
7 – Power Supplied to LNB from the 7000 Series Controller for the Reference Satellite
E 63W E0 A0 P0
0 0990 30000 DB-7 DD
1
4
6
2
5
3
7
