C-COM Satellite Systems Inc.
Page 43 of 164
E
enables the ACP after locking on signal in which an isolation value is displayed after successfully
passing the 2 tests.
A_ST
ACP has started
A_SP
ACP has passed
5 – Beacon Receiver Frequency and Signal Strength
The Beacon Receiver is an optional unit that could be used to acquire satellite with the
7000 Series Controller. See “iNetVu User Manual – Beacon Receiver” (7000 Controller
section) for details
7.6.1.10. IP
This menu displays the IP address of the user configured iNetVu
®
7000 Series Controller
and Modem. (Ensure the IP address of the modem configured is the actual IP address of
the modem, and that the 7000 Controller is operating on the same network as the
modem)
Fig. 27:
“IP” (Controller and Modem IP) Display
1 – C_IP: iNetVu
®
7000 Series Controller’s IP Address – Default 192.168.0.2
2 – M_IP: The Modem IP configured in the 7000 Series Controller.
7.6.1.11. GW
1 – S_IP (iNetVu
®
7000 Series Controller’s Subnet Mask IP Address –
Default
255.255.255.0)
1.
Gateway IP Address
(Default: 192.168.0.32 or 192.168.100.1 depends on Modem
Type/Service)
C_IP : 70.232.247.50
M_IP: 70.232.247.49
1
2
S_IP : 255.255.255.0
G_IP: 70.232.247.49
1
2
