C-COM Satellite Systems Inc.
Page 59 of 164
•
Current Limit 7 – 80% of Current Limit 9
•
Current Limit 5 – 90% of Current Limit 6
•
Current Limit 4 – 80% of Current Limit 6
•
Current Limit 2 – 90% of Current Limit 3
•
Current Limit 1 – 80% of Current Limit 3
I
- Configurable Current Limit for Slow Speed (6) which is displayed by the
S:
field (#2 speed
setting) movement is set to 7.0.
(i.e.
I:07.0
and S
: 6
Represents Current Limit of 7 A @ speed 6.
7 – Elevation of Compass Reading
Number of degrees that the Antenna requires to be elevated to ensure that the
compass is level and is able to acquire an accurate compass reading for finding
satellite (see Appendix 1 for default values).
7.6.4.5. AZ
The AZ menu allows configuration of the Azimuth axis, including AZ zero and stow limit,
azimuth search window size, slow speed movements, and current limits at high and slow
speeds.
Fig. 43:
“AZ” (Azimuth) Display
1 – Configurable AZ Zero (Pot)
AZ Zero is an A/D value from the potentiometer calculated upon azimuth
calibration which physically determines where the iNetVu
®
Mobile Software
places Azimuth Angle 0°. The AZ Zero may vary approxi15% from the
Default values (see Appendix 1). The user may edit these values through this
window; however any changes may result in failure to recognize the correct 0°
angle. This parameter has a configurable range of (150-700).
2 – Compass Offset
A fixed offset could be used to adjust the compass heading. This value would be
added to the calculated compass heading to compensate for any consistent
inaccuracy of the compass reading.
Z: 346.9 CP_O:+00 E
S: 6 I: 07.0
1
4
5
3
2
