C-COM Satellite Systems Inc.
Page 62 of 164
3 - Polarization Offset
By default this polarization-offset value is set to +0°. If there happens to be a
requirement for a polarization offset in the satellite position, the user may
manually enter this value in this area. This area is also updated automatically if
the skew adjustment procedure recognizes inaccuracy in the target polarization
angle. Misconfiguring this field will result in undesirable results.
4 –Speed Setting
S
The user may configure the slow speed of the polarization movement. The slow speed is a
basis for the satellite searching procedure. See Appendix 1 for details.
5 – Current Settings
A software controlled current protection for the Mobile Platform’s polarization
motors. When any of the Mobile Platform’s motors are moving at the associated
speed, the current drawn to move the motor is monitored and should it exceed
the Current Limit, an error message will appear. For Motor Speeds that are not
listed (Speed 1, 2, 4, 5, 7, 8), the Current Limit for those speeds is calculated
using a percentage of the Current Limit above it. See Appendix 1 for the default
current limits for all iNetVu
®
Mobile Platforms.
•
Current Limit 8 – 90% of Current Limit 9
•
Current Limit 7 – 80% of Current Limit 9
•
Current Limit 5 – 90% of Current Limit 6
•
Current Limit 4 – 80% of Current Limit 6
•
Current Limit 2 – 90% of Current Limit 3
•
Current Limit 1 – 80% of Current Limit 3
I
- Configurable Current Limit for Slow Speed (6) movement is displayed under the
I:
while the speed under
S:
(i.e. I: 1.5 Represents Current Limit of 1.5 A @ speed 6)
7.6.4.7. GP
Allows for the Configuration of the GPS parameters and settings,
Fig. 45:
“GP (GPS ) Configuration
G :O 45.41N 75.62W
1
2
3
