C-COM Satellite Systems Inc.
Page 69 of 164
7.6.4.10. C3
Fig. 49:
Controller C3 Configuration
1- Current LCD and Web Interface Password
The user may change this password by using the “↓” and “↑” buttons on the front panel
of the 7000 Series controller and the “→” and “←” buttons to navigate through the
character fields. This password must be remembered in order for the user to re-enter
the LCD screen configuration interface, or the web interface.
2- LO – (LNB)
Configurable to allow satellite accusation when frequency changes, values range from
10.75, 9.75, 10.00, 10.60 and 11.30.
The default value should be set to
10.75
, the user is not required to change this value
unless necessary, otherwise select the carrier from the table or enter one if not listed.
3- 22 KHz Tone (Enable/Disable)
This feature allows users to enable/disable the 22 KHz tone for supporting LNB’s.
E –
Enabled
D –
Disabled
4- DISABLE STOW
The system can be configured to disable the STOW by changing the ID.
8755 –
Disables the STOW
8955 –
Enables the STOW
PWD :: password
LO :0—10.75 D 9999
1
2
3
4
