C-COM Satellite Systems Inc.
Page 75 of 164
7.6.5.3. DPYQ
DPYQ deploys to the set angles excluding the fine tuning and pre-condition movement
of EL to 30˚ as a first step.
Note: See DPY for parameter functions and meanings as they are identical.
Fig. 56:
Quick Deploy Configuration
7.6.5.4. DPY_C
This is the compass test feature. A compass check is performed at the set angles.
1 – Elevation Movement
User-defined target elevation angle offset for compass reading.
2 – Polarization Movement
User-defined target polarization angle for compass reading.
3 – Azimuth Movement
User-defined target azimuth angle for compass reading.
4 – Check Compass at specified target point.
Tests the compass’ heading and accuracy at the user defined Elevation,
Polarization, and Azimuth angles, by rotating the antenna at 90
intervals and
comparing the compass readings with the actual antenna’s movement. This
function is mainly used for testing purposes. Ensure proper orientation (front of
vehicle is point north). Popup (see below) displayed in Software application.
E: +20 P+60
A +180 CP_T
1
2
3
4
E: +20 P+60
A +180 DPLY
2
1
3
4
