Step 6:
To release your child from the restraint simply press
the buckle and lift the shoulder straps from the childs
shoulders and carefully remove your child from the
seat.
Always use a lap or lap-sash seat belt and upper anchorage strap to attach the child
restraint to the vehicle.
Do not use the restraint without the upper anchorage strap correctly attached and adjusted.
Do not use on any vehicle seat which faces sideways or rearwards.
IF AN AIRBAG IS FITTED IN THE SEATING POSITION WHERE THE CHILD RESTRAINT
IS TO BE FITTED, FOLLOW THE VEHICLE MANUFACTURER’S WARNINGS AND
INSTRUCTIONS.
Do not use the restraint if the buckle is sluggish or does not provide an audible “Click” refer
to Cleaning Instructions on page 20.
Use
Using in-built harness
To release child
WARNINGS
!
Figure 4
Harness
adjuster strap (B)
“PULL”
TO TIGHTEN
DO NOT LEAVE CHILDREN UNATTENDED
IN THE CAR.
Fit the harness firmly to the child.
A LOOSE RESTRAINT OR HARNESS IS DANGEROUS.
WARNINGS
!
• Ensure buckle is adjusted centrally in relation to the
child. Adjust if necessary.
• Check that the slack in the straps is removed.
• The harness shoulder straps must fit firmly to the
child.
• A loose harness could result in serious injury in an
accident.
S E C T I O N
Child Car Seat
WITH INBUILT HARNESS
18