2
V 1.7
ride
ROLLER
6-14
Tighten the bolts with full force. Ensure
that you hold the long side of the Allen key
in your hand as this enables you to exert
greater force.
without bearings
Bolt M8x20 nylock
1x
Multi angle joint
Clamping par
holes without threa
1x
T-Positioning block
3x
+
+
Double check here:
Does your result looks exactly like
the image at the bottom of the
page?
The positioning blocks are
some of the smallest Infento
parts but they are also some of
the most important. They ensure
that everything connects to each
other properly. This prevents
parts from twisting and com-
ing loose when under pressure.
Therefore, always use at least
two positioning blocks per block.
Summary of Contents for ROLLER G1
Page 37: ...32 V 1 7 ride ROLLER 6 14 A B C D 40x80_he Brake cable clip belt pulley 46T 4x...
Page 39: ...34 V 1 7 ride ROLLER 6 14 A B C D CLICK Spring brake system 7 inch wheel house 1x...
Page 43: ...38 V 1 7 ride ROLLER 6 14 A B C Word mark Bolt M8x20 nylock 1x...
Page 44: ...ROLLER G1 118 168 cm 47 66 inch THANK YOU FOR READING ME...
