Striker HD
-User’s Guide
2. OPERATION
Turning Power On and Off
Plug in the supplied power adapter to the electrical outlet and to the back of Striker HD set-top
box or use a remote control to turn it on or off (standby). When using the remote control, pressing
the POWER button once will put Striker HD set-top box on a standby mode while pressing and
holding the same button for approximately 3 seconds will turn it off.
Changing Channels
You can change channels in three ways:
Press C or – on the remote control to step through the channel selection.
Enter the number of the channel you wish to view using the number keys on the remote
control.
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press or – on the remote control to adjust the volume. When you adjust the volume,
the volume scale is displayed on the screen. Press MUTE on the remote control to toggle the
sound on and off. For best audio quality when using the analog L/R (var.) volume controlled audio
outputs, use the remote control to set the Striker HD set-top to approximately three quarters of
the maximum volume level and then adjust the audio levels on external devices such as your TV
or A/V receiver. When using the analog L/R (fixed) audio outputs or any of the digital audio
outputs (HDMI, optical or coaxial digital audio) adjust the audio levels on your external device
such as your TV or A/V receiver. You may also be able to program your remote to control the
volume of your TV or A/V receiver directly (refer to the remote control instruction manual).
12/ 36
