TD-TM102 Rev R
|
2018-06-25
1 (11)
Infinera Proprietary and Confidential
7
Plug-in units in TM-102
The table below lists all plug-in units supported at release R31.0 and in which chassis and slot
positions they can be inserted. Note that the table also contains units that no longer are
orderable.
A “Type” parameter is used to identify the type of units as shown below:
Type
Description
A
Active unit, i.e. must be inserted in an active slot
P
Passive unit, i.e. must be inserted in an passive slot
FH
Full-height unit, i.e. occupies a full-height slot
HH
Half-height unit, i.e. occupies a half-height slot
The board width is also indicated in the Type parameter.
As an example: The TPQMR unit has the type
A/FH-1
meaning that the unit an Active, Full-
Height unit that requires 1 slot.
“NA” means that this unit is not supported. “EOA-A” means “End Of Availability - Announced”.
The board is in end of life process. “EOA-E” means “End Of Availability - Effective”. The board
is no longer orderable.
The 40G and 100G units are not part of the table since they require two or three slots.
Table 4 Plug-in units, TM-102 compatibility (Release R31.0 content)
Category
Item Name
Item ID
Type
TM-102
TM-102-P
AS-L-S
TM-102-P
AS-3S
EOA
status
Transponders,
Muxponders
@2.5G
line rate
Quad MultiRate
xWDM
Transponder
TPQMR
A/FH-1
2
NA
NA
EOA-E
Double DGbE
xWDM, Basic
Unit
TPDDGBE
A/FH-1
2
NA
NA
8p SDH/SONET
2,5G Muxponder
v2
MXP8/II
A/FH-1
2
NA
NA
EOA-E
@4G
line rate
MultiService
Muxponder
MS-MXP
A/FH-1
2
NA
NA
Quad MultiSer-
vice
Transponder
TPQMS
A/FH-1
2
NA
NA
EOA-E
Quad MultiProto-
col Transponder
TPQMP
A/FH-1
2
NA
NA
EOA-E
@10G
line rate
Double 10Gb/s
Lite Basic Unit
TPD10G-L-BU
A/FH-1
2
NA
NA
Hex MultiRate
16G Lite
Transponder
TPMRHEX-L/16G
A/FH-1
2
NA
NA
10Gb/s C-band
Tunable Ext
Reach
TP10G/TC-ER
A/FH-1
2
NA
NA
EOA-E
10G C-band
Tunable OTN
Transponder
TP10GOTN/TC
A/FH-1
2
NA
NA
EOA-E
10G Hex Trans-
ponder OTN
TPHEX10GOTN
A/FH-1
NA
NA
NA
OTN Muxponder
10G
MXP10GOTN
A/FH-1
2
NA
NA
