Chapter 2 - Features set
User Manual
R5000 series - Web GUI
77
Logical channel
parameter
Description
Channel
Logical channel number (1-200 allowed)
Max
Set the maximum transmit rate (in Kbps)
You can limit the data traffic within a logical channel to
a certain rate of kilobits per second
PPS
Set the maximum packet per second rate (in pps)
You can limit the data traffic within a logical channel to
a certain rate of packets per second
Latency
Set the maximum packet latency (in ms)
Leave it empty for default
Priority
Allocate the priority for all the packets going through
a specific rule:
-
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
-
“Set” - used to assign a new priority regardless of
the value already assigned to the packet
Redirect To
Set the gateway IP address (only for the router mode)
The whole stream is redirected to the specified IP-
address regardless of the current routing configuration
It may be useful when the router serves as a network
access unit and two or more different clients want to
access different providers through one unit
Information
Set a description for the logical channel created
Table 20 - Logical channel parameters
You can delete an existed logical channel by pressing the corresponding «Remove
Channel» button.
You can create a traffic shaping rule by pressing the «Add Rule» button.
Traffic
shaping rule
parameter
Description
Channel
Select the logical channel from the dropdown list
