Chapter 2 - Features set
User Manual
R5000 series - Web GUI
10
Name
Displays the neighbor
’s name
Node ID
Displays the sequential number of the neighboring node
Distance
Displays the calculated (theoretical) distance to the
neighbor unit (in Km)
Power
Displays the power level of the Tx and Rx signals of the
neighbor unit (in dBm)
Ref. Level
Displays the Tx and Rx signals levels for the minimal
available bitrate of the neighbor unit (in dB)
Current Level
Displays the Tx and Rx signals levels for current bitrate
of the neighbor unit (in dB)
Bitrate
Displays the set bitrate value for the Tx and Rx signals of
the neighbor unit
Retries
Displays the percentage of Tx and Rx retries of the
neighbor unit
Errors
Displays the percentage of Tx and Rx errors of the
neighbor unit
Load
Displays the number of kbps and packets that are going
inbound and outbound the radio interface of the neighbor
unit (main data)
Table 2 - Wireless Links Statistics
2.3.3. Switch Statistics
This section displays the number of unicast, broadcast and flood packets switched
within each Switch group and also within kernel system (internal traffic), in real-time
(since the last reboot):
Figure 5 - Switch Statistics
It also displays the number of dropped packets for: STP, unreachable destination,
firewall, possible loop, discard, MAC limits and reverse, within each Switch group
and kernel, in real-time (since the last reboot):
