Hybrid DVR User Manual
TEC-VS-219-1905-V01
DNS
DNS1/DNS2: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Generally only DNS1 is
entered.
Port
Web Port: This port is used to log in remotely to the DVR (e.g. using the Web Client). If the default port 80
is already taken by other applications, another port can be used.
Client Port: This port is used by the DVR to send information through mobile app. If the default port
9000 is already taken by other applications, change it to another port.
RTSP Port: This port is used by the DVR to transmit real-time streaming to other devices (e.g. Streaming
Media Player.).
UPNP: If remote login to the DVR is required using Web Client, the port forwarding should be setup in the
router. If the router supports UPnP, then enable this option. In this case, there is no requirement to
manually configuring the port forwarding on the router. If the router does not support UPnP, the port
forwarding should be completed manually in the router.
PPPoE
This is an advanced protocol that allows the DVR to connect to the network more directly via DSL
modem. Check the “Enable PPPOE” box, and then enter the User name and Password of the PPPoE.
3G
Prior to using the mobile network, a 3G dongle should be connected to the DVR. Enable the 3G
option; enter the APN, Dial Code, User name and password according to the instruction of the 3G
dongle devices.
4.3 Date and Time
This menu is used to configure the Date, Time, Date Format, Time Format, Time Zone, NTP and DST.
Click on the calendar icon to set the current system date.
Date: Click on the calendar icon to set the system date.
Time: Click to set the system time.
Date Format: Choose from the dropdown menu to set preferred date format.
Time Format: Choose time format between 24Hour and 12Hour.
Time Zone: Set the correct time zone.
