Hybrid DVR User Manual
TEC-VS-219-1905-V01
Post Recording
: To set how long after an event occurs that the DVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message
: Check the box to display icon on the live view screen when the motion is
detected.
Send Email
: If enabled the DVR will send an auto-email when the motion is detected.
Full Screen
: If this function is enabled and a motion is detected in a channel, then this channel will be
displayed in full screen.
FTP Upload
: To upload alarm images to FTP server when motion is detected. To enable FTP, refer to FTP
section 9.7 FTP.
6.6 PIR
This is an optional function. It is used to setup the PIR recording of the camera.
Switch
: Enable or disable PIR recording.
Sensitivity
: Set the sensitivity level. Level 1 the lowest sensitivity level while level 8 is the highest sensitivity
level.
Setup
: Click
icon into the setup page.