KIT
ENTRANCE PANEL INSTALLATION
ART. Z1101 – Z1102
Semi-surface mounted installation
1)
Install a flush box of universal type 503 (InfinitePlay ZT503 - Vimar
V71303 - Bticino 503) or round of 60mm diameter, in vertical
position at a height of 160 cm from the floor to the top edge, as
shown in the figure.
Fix the chassis frame to the box using the 2 screws.
2)
Wire the electronics assembly as shown through the RJ45
connector.
Position the Small Entrance Panel license tarting from the top and
then turning downwards.
Z1101 / Z1102
Small audio-video entrance panel for INFINITEPLAY video door entry systems.
4
EN
3)
Fix the Small Entrance Panel using the 2 screws M3x12 Torx
included.
4)
Insert the card names and close the lid