TROUBLE
PROBLEM CAUSE
SUGGEST REMEDY
Fan will not start.
• Fuse or circuit breaker blown.
• Loose power lone connections
to the fan.
• Speed controler not in correct
position.
• Check main and branch circuit fuses or circuit
breakers.
• Check line wire connections to fan.
• Check speed controller’s position.
Fan sounds noisy.
• Top canopy touching ceiling.
• Loose fan blades screws.
• Ceiling fan not secured
against ceiling.
• Incorrect speed controller.
• Lower canopy from ceiling to ensure mínimum
3mm clearance.
• Re-tighten all screws on fan blades but never
o ver-tighten.
• Re-tighten all screws in the hanging bracket
or plate.
• Change the controller to the one supplied.
Mechanical noise.
•
Allow at least for 8 hours setting-in period.
Fan wobbles.
• Fan blades are not horizontal
to ceiling.
• Blade screws are loose.
• Measure from ceiling to tips of blades, the
rotate fan so all blades are checked for equal
height from ceiling(not ajustments may be
made by slight pressure up or down on blade
holders).
• Make sure all screws are securely fastened.
REPAIR GUIDE:
SUPPLY CIRCUIT
SUPPLY CIRCUIT
BLACK
BLACK
WHITE
WHITE
LIGHT
LIGHT
WHITE
WHITE
MOTOR
MOTOR
BLUE OR RED
BLUE OR RED
BLUE OR RED
LIGHT LEAD
BLUE OR RED
LIGHT LEAD
BLACK FAN
LEAD
BLACK FAN
LEAD
WHITE
(COMMON)
WHITE
(COMMON)
BLUE OR RED
BLUE OR RED
WHITE
WHITE
GROUNDED CONDUCTOR
GROUNDED CONDUCTOR
GREEN GROUNDING LEAD
GREEN GROUNDING LEAD
WIRING BOX
WIRING BOX
(C) FOR CONTROL OF FAN FROM WALL
(D) FOR CONTROL OF FAN AND LIGHT FROM WALL
FAN
SWITCH
FAN
SWITCH
LIGHT
SWITCH
08
