ASSEMBLY
Assemble the base.
Insert the outer tube into the base, slide on the weight and secure using
the locking screw. Place the assembly upright.
Secure the fan motor to the inner tube using the screws provided.
Attach the rear guard to the fan motor, securing it in place with the cover
fixing screws.
Place the locking nut and fan blade on the motor shaft, securing it in
place using the fan blade screw.
Hold the front guard against the rear guard and secure it in place with
the cover fixing screws.
OPERATING INSTRUCTIONS
1.
Connect the power plug to a suitable outlet.
2.
Select the desired speed using the Speed control:
0 – Device Off
1 – Low speed
2 – Medium speed
3 – High speed
3.
The incline of the ventilator head can be adjusted by tilting it forwards or
back wards. The ventilator head can then be locked into position, which
is indicated by an audible click.
4.
To adjust the height, slacken the height adjustment screw, slide the upper
section to the required height and re-tighten the adjustment screw.
