9
11.
Make sure there is no liquid or humidity in the
outlet where the product plug is installed.
12.
An omnipolar switch capable to disconnect power
supply is required for installation. Disconnection from
power supply shall be provided with a switch or an
integrated fuse installed on fixed power supply according
to building code.
13.
The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
14.
Unplug the unit during installation, maintenance,
cleaning and repair.
15.
Appliance is equipped with a
type ‘’Y’’
cord cable.
16.
The circuit breaker switches of the cooker shall
be placed so that end user can reach them when the
cooker is installed.
17.
Fixed connections shall be connected to a
power supply enabling omnipolar disconnection.
For appliances with over voltage category below III,
disconnection device shall be connected to fixed power
supply according to wiring code.
18.
Do not remove ignition switches from the appliance.
Otherwise, live electric cables can be accessed. It may
cause an electric shock.
Summary of Contents for 8445639001561
Page 97: ......