QTY
SIZE
COLOR
Style
QTY
Style
2
22' 2"
Orange
Keder
1
8 Way Crown AT
2
21'10"
Orange
Rafter
4
Regular Corners
16
14'4"
Red
Hip Rafter
8
Regular T's
8
10'6"
Green
Corner Rafter
4
Bear Claws
16
14'4"
Red
Spreader
4
Fan T
16
7' 8"
Black
Legs
16
Ratchets
16
Baseplates
16
Weights / Stakes
104
Tent Pins
1
Brace Package
Pre-Site Inspection- Call your local utitlity companies prior to installation for any underground obstructions.
1. Layout the frame parts in the estimated location peertaining to the diagram. The spreader pipe is placed out to form
the perimeter, and the rafters are laid in the interior location.
2. Start with the 8 way crown. Lay the crown on a flat surface to determine the correct placement, when the crown is on
a flat surface the angles that are not touching the ground (every other one) will correlate with the 4 corners.
Attach the hip rafters (14’4’’ red) to the 8 way crown at angle not touching the ground by sliding the pole over the fitting
and lining up the holes in the pole with those in the fitting. Place a pin in the first hole to secure the pole in place. Repeat
at all four corners.
3. Attach the poles (21' 10" orange) to two of the remaining angles of the 8 way crown using the same technique as in step 2.
Attach the two 22' 2" Keder Pipe to the remaining opposite angles aligning up the 8 way crown with the keder slots.
4. Attach the Bear Claw fittings to the 4 hip rafter (14’4” red), at point 6, by sliding the pole over the fitting. Line
up the hole of the pole with those of the fitting and place a pin. Attach hip rafters (14’4’’ red) to the Bear Claw at
points 1, 3, and 5. Attach corner rafters (10’6” green) to the Bear Claw fitting at points 2 and 4.
5. Attach the corner fitting to the hip rafter (point 3 only) by sliding the pole over the fitting. Line up the hole of the
pole with those of the fitting and place a pin. Attach the Fan T to the rafters (21’10" orange) and to the hip rafters
(points 1 & 5).
6. Join the regular t fittings to the corner poles (10’6” green) by sliding the pole over the fitting. Line up the hole of
the pole with those of the fittings and place a pin.
40 x40 All Trac Frame Tent Instructions page 1 of 2
Corner
Optional Items
All Seasons Tent Sales
40 x 40 Contempo Frame Tent Set Up Instructions
Components
Pipe
Corner
8 Way Crown Regular T
10'6"
10'6"
Fan T
Bear Claw
22' 2" Keder
Pipe
22' 2" Keder
Pipe
8 way crown
