background image

QTY

SIZE

COLOR

Style

QTY

Style

6

22' 2"

Orange

Keder

2

Half Crowns AT

6

21'10"

Orange

Rafter

4

Regular Corners

16

14'4"

Red

Hip Rafter

14

Regular T's

8

10'6"

Green

Corner Rafter

2

Spreader T

28

14'4"

Red

Spreader

1

Spreader T AT

24

7' 8"

Black

Legs

4

Bear Claws

6

Fan T

24

Ratchets

24

Baseplates

24

Weights / Stakes

164

Tent Pins

1

Brace Package

3

Spreader Cables

Pre-Site  Inspection- Call your local utitlity companies prior to installation for any underground obstructions.  

1. Layout the frame parts in the estimated location peertaining to the diagram. The spreader pipe is placed out to form
the perimeter, and the rafters are laid in the interior location.

2. Start with one of the Half Crowns. Attach the hip rafters (21' 10" orange) to the Half Crown at the third point, and
attach the Keder pipe to the one and five points. Place a pin in the first hole to secure the pole in place.

3. Attach the hip rafter (14’4’’ red) to the remaining points of the Half Crown using the same technique as in step 2.

4. Attach a spreader (9’4” white) to the Half Crown, and connect it to the Spreader T. Attach another spreader ( 9” 4”
white) from the Spreader T  to the  Spreader T- AT and repeat for a total of 3 Spreader T's. The last Spreader T will

connect to the second Half Crown. Attach rafters (21’10" orange) to the Spreader T's one and three. Attach the keder
pipe to the middle spreader T.

5. Attach the Bear Claw fitting to the 4 hip poles (14’4” red) by sliding the pole over the fitting. Line up the hole of
the pole with those of the fitting and place a pin. Attach hip rafters (14’4” red) to the Bear Claw fitting at points 1, 3, and 5.

6. Attach corner poles (10’6” green) to the Bear Claw fitting at points 2 and 4. 

7. Attach the corner fitting to the hip rafter (point 3 only) by sliding the pole over the fitting. Line up the hole of the
pole with those of the fitting and place a pin. Attach the Fan T's to the rafters (21’10" orange) and to the hip rafters
(points 1 & 5).

40 x 80 All Trac Frame Tent Instructions page 1 of 2

Optional Items

All Seasons Tent Sales

40 x 80 All Trac Frame Tent Set Up Instructions

Components

Pipe

Corner

Half Crown 

Regular T

10'6"

10'6"

Fan T

Bear Claw

Spreader T

Half Crown

Half Crown

Spreader T

Spreader T AT

Spreader T

Corner

Spreader T AT

2

1

' 1

0

"

22' 2" Keder 
Pipe

22' 2" Keder 
Pipe

22' 2" Keder 
Pipe

21' 10"

21' 10"

Summary of Contents for 20 x 20 All Trac Frame Tent






























Reviews: